V-USB 2008-10-22 • Fixed bug in libs-host/hiddata.c function usbhidGetReport(). • Fixed bug with long transfers (above 254 bytes total). • AVR’s internal RC oscillator is now supported at 12.8 MHz. • Added hook to SOF code so that oscillator can be tuned to USB frame clock. • Added example code for oscillator tuning to libs-device. • New options USB_CFG_CHECK_DATA_TOGGLING and USB_CFG_SUPPRESS_INTR_CODE.

Juniper SRX340 Hardware Manual. ® To obtain the most current version of all Juniper. To use the USB console port, you must download a USB driver to the. Please check if the USB console driver available on the below link works for you. Manager Driver latest version for.

• Use control transfer recipient 'device' instead of 'interface' in HID examples. • Fixed USB Reset detection for high speed CPU clocks. • Added timeout to waitForJ loop.

Helps preventing unexpected hangs. • Code size optimizations.

Hi, anyone in here who knows which (Windows) driver there should be installed to use the USB serial console port on the new SRX300 gateways? I'm not able to find information about which chipset that has been used and cannot find any relevant download on juniper.net (neither for SRX300, SRX340, SRX345 or SRX1500 which I expect uses the same chipset). The suggested driver for EX2200-C and EX4300 usb serial console does not give any positive result.

Windows still reports a missing driver. Any suggestions?

Thanks in advance. -- Best regards, Jonas Hauge. Hi Pulkit, Thanks for the pointer!

Technically the driver works BUT: it is so old that Windows 10 rejects the driver installation due to missing signing. I have to reboot and select some special options just to allow the installation of the driver. I have tried to download the latest version of the VCP CP210x driver from but the SRX300 device is not recognized correctly by this driver. Basically Juniper needs to provide an updated driver for the VCP interface for all newer SRX gateways (300/320/340/345/550/1500).

Installer Demon Slayer. Anyway - thanks again. This will keep it working for now.

I will get in touch with Juniper regarding the missing driver. -- Best regards, Jonas Hauge.